Jump to content
SAU Community

Recommended Posts

have you/ do you intend to run and atmo bov? If so, go the MAP sensor route.

On a side note, can the adaptronic have duel maps/flex fuel setups?

Edited by Mitcho_7

Yeh. The adaptronic supports flex fuel by interpolation of fuel consumption. That's what the manual said anyway

But not sure about 2 separate maps.

have you/ do you intend to run and atmo bov? If so, go the MAP sensor route.

On a side note, can the adaptronic have duel maps/flex fuel setups?

Yep you can setup it to run flex fuel and switch maps.

Could something be restricting my setup do you think guys? Seems odd that's now 2 guys making more power then me on a lot less boost.

I understand different dyno etc etc

But just wondering if anyone has any opinions?

Tis decent compression, maybe look at the cooler like was suggested

Did Jez drop the exhaust at all to see if it was causing a restriction or were you pressed for time?

Edited by Mitcho_7

Finally got mine SS1PU tuned. It made 255rwkws on 16psi. Dame responsive to drive. will upload sheets later when I get a scanner.

nice result mate, congrats

Z32 AFM

3 inch exhaust (decat)

555 injectors

SS1PU

Nistune

3 inch intake

Splitfire coils

Hybrid front mount

Umm have I missed anything

Mine has:

3.5 inch exhaust (decat all the way though)

550c injectors

SS1PU

Adaptronic plugin (Used to have a wolf 3D)

3 inch intake

Splitfire coils

Unknow cooler came with the car.

The best run was 261rwkws when car's cold, and average is 255rwkws after couple of runs. sheet is attached.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hey, it's me! Though honestly, if I had 20M in my bank account tomorrow, I would not want to be rid of my car all of the sudden - Which makes me think this is money stuff, not "I actually hate car" stuff. I'd probably double down and buy even more trinkets and fun things for it. If this is not you, then sell it cheaper. It will sell at a certain price after all.
    • This is the LCA mount reloctaion kit. Self explanatory in its description. https://au.gktech.com/products/s13-180sx-r32-subframe-anti-squat-reduction-weld-in-kit?_pos=62&_fid=1e812d392&_ss=c These are the alloy subframe bush inserts that I am using. I like them. https://au.gktech.com/products/rear-subframe-slip-in-collars?_pos=29&_fid=1e812d392&_ss=c Alternatively, if you have original and shitty bushes, you might consider outright replacement with poly. https://au.gktech.com/products/polyurethane-rear-subframe-bushes?_pos=28&_fid=1e812d392&_ss=c I would also higly recommend that you look into adjustable RUCAs and tension rods, so you can sort out the camber and bump steer behaviour, especially if the car will be any more than ~15mm lower than stock. I would also highly recommend the GKTech FUCAs, although you really should do some research and learning on the subjetc of R32 FUCAs before making any decisions. All of this will be criticaly difficult to get through a TÜV inspection too, if that happens to be relevant to you. Note that if you do install the relocation kit, you will absolutely have to replace the associated bushes with spherical joints (you can read all about that on the product page) or upgrade the LCAs also.
    • I picked up my block and head last week and have been slowly assembling it since then. Pictures I took earlier this week. The rest of the auxiliaries are on now. I just have my intake manifold runners to tap for my WMI direct port setup before putting it back on. I should hopefully have the motor back in by this weekend.   
×
×
  • Create New...